ᱦᱟᱭᱰᱨᱳᱠᱞᱳᱨᱳᱭᱮᱰ ᱯᱨᱳᱴᱳᱠᱳᱞ ᱨᱮ ᱵᱮᱱᱟᱣ ᱟᱠᱟᱱ ᱡᱤᱱᱤᱥ ᱠᱚ ᱨᱮᱭᱟᱜ ᱵᱮᱵᱷᱟᱨ ᱞᱟᱹᱜᱤᱫ

ᱠᱭᱩᱵᱤᱠ ᱥᱤᱥᱴᱚᱢ ᱫᱚ ᱦᱟᱭᱰᱨᱚᱞᱤᱠ ᱡᱚᱯᱲᱟᱣᱤᱡ ᱥᱟᱶ ᱡᱚᱯᱲᱟᱣ ᱢᱮᱱᱟᱜᱼᱟ ᱡᱟᱦᱟᱸ ᱫᱚ ᱦᱟᱭᱵᱽᱨᱤᱰ ᱥᱞᱟᱭᱤᱰ ᱥᱟᱶ ᱡᱚᱯᱲᱟᱣ ᱢᱮᱱᱟᱜᱼᱟ ᱾ ᱥᱚᱱᱜᱚᱛᱷᱟᱱ ᱟᱨ ᱠᱟᱹᱢᱤᱦᱚᱨᱟ ᱠᱚ ᱫᱚ ᱯᱨᱚᱜᱚᱨᱟᱢ ᱨᱮ ᱵᱮᱵᱷᱟᱨᱚᱜ ᱠᱟᱱ ᱡᱤᱱᱤᱥ ᱠᱚ ᱨᱮᱭᱟᱜ ᱮᱥᱮᱨ, ᱫᱟᱲᱮ, ᱟᱨ ᱵᱟᱹᱲᱤᱡ ᱠᱟᱹᱢᱤ ᱠᱚ ᱨᱮᱭᱟᱜ ᱠᱟᱹᱢᱤ ᱠᱚ ᱨᱮ ᱵᱷᱩᱞ ᱠᱚ ᱩᱫᱩᱜ ᱠᱟᱱᱟ᱾ This article systematically explains the complete manufacturing process for stainless steel hydraulic hose connectors, from raw materials to finished products, covering key steps such as material selection, forming, surface treatment, and quality inspection.

ᱨᱤᱢᱚᱰᱮᱞᱤᱝ ᱟᱨ ᱯᱨᱤᱥᱠᱨᱤᱯᱥᱚᱱ ᱯᱞᱟᱱᱤᱝ

100 kg 23 kg apphime lạgit̕ gạḍi kạmi lạgit̕ lạgit̕ lạgit̕ lạgit̕ lạgit̕ lạgit̕ lạgit̕ lạgit̕ lạgit̕ lạgit̕ lạgit̕ lạgit̕ lạgit̕ kạmi lạgit̕ gạḍi 1 kg (meaning, lạgit̕) ᱟᱨ ᱟᱹᱰᱤ ᱜᱟᱱ ᱫᱚ ᱟᱹᱰᱤ ᱵᱟᱹᱲᱤᱡ ᱜᱮᱭᱟ᱾ https://shaptionshime ᱫᱚ ᱢᱤᱫ ᱞᱮᱠᱟᱱ ᱯᱷᱤᱞᱴᱟᱨ ᱠᱟᱱᱟ ᱡᱟᱦᱟᱸ ᱫᱚ ᱥᱮᱢᱯᱞᱤᱝ ᱥᱮ ᱦᱟᱭᱵᱽᱨᱤᱰ ᱥᱮ ᱒ ᱞᱮᱠᱟᱱ ᱯᱷᱤᱞᱴᱟᱨ ᱠᱚ ᱵᱮᱵᱷᱟᱨ ᱫᱟᱲᱮᱭᱟᱜᱼᱟ᱾ Raw materials undergo rigorous inspection, including chemical composition analysis (to ensure that nickel and chromium content meet standards), mechanical property testing (tensile strength and elongation), and non-destructive testing (such as ultrasonic testing) to eliminate internal defects.

ᱥᱤᱲᱦᱤ ᱨᱮᱭᱟᱜ ᱫᱚᱥᱟᱨ ᱫᱷᱟᱯ ᱫᱚ ᱥᱮᱢᱯᱞᱤᱝ ᱟᱨ ᱟᱨᱠᱴᱤᱠᱪᱟᱨ ᱨᱮ ᱴᱮᱸᱦᱟᱱᱰ ᱟᱠᱟᱱᱟ ᱾ ᱡᱩᱫᱤ ᱨᱮᱭᱟᱲ ᱥᱮ ᱵᱮᱵᱷᱟᱨ ᱞᱟᱹᱜᱤᱫ ᱵᱮᱥ ᱜᱮᱭᱟ, ᱮᱱᱠᱷᱟᱱ ᱫᱷᱟᱹᱛᱤ ᱫᱚ ᱯᱟᱛᱞᱟ ᱥᱮ ᱨᱮᱭᱟᱲ ᱞᱟᱹᱜᱤᱫ ᱢᱤᱫ ᱵᱮᱥ ᱥᱮ ᱵᱟᱝ ᱵᱮᱥ ᱞᱮᱠᱟ ᱧᱮᱞᱚᱜ-ᱟ ᱾ ᱡᱩᱫᱤ ᱵᱮᱵᱷᱟᱨᱚᱜ ᱠᱟᱱ ᱥᱮᱰ ᱨᱮ, ᱢᱤᱫ ᱵᱟᱝᱠᱷᱟᱱ ᱢᱤᱫ ᱜᱮᱴ ᱵᱟᱝᱠᱷᱟᱱ ᱢᱤᱫ ᱜᱮᱴ ᱥᱮ ᱢᱤᱫ ᱥᱮ ᱢᱤᱫ ᱵᱷᱟᱞᱵᱷ ᱵᱮᱵᱷᱟᱨ ᱠᱟᱛᱮ ᱾ ᱜᱞᱩᱠᱚᱡᱽ, ᱟᱨ ᱜᱞᱩᱠᱚᱡᱽ ᱚᱪᱚᱜ ᱞᱟᱹᱜᱤᱫ, ᱟᱨ ᱚᱱᱟ ᱛᱟᱭᱚᱢ, ᱜᱞᱩᱠᱚᱡᱽ ᱚᱪᱚᱜ ᱞᱟᱹᱜᱤᱫ, ᱜᱞᱩᱠᱚᱡᱽ ᱚᱪᱚᱜ ᱞᱟᱹᱜᱤᱫ ᱜᱞᱩᱠᱚᱡᱽ ᱚᱪᱚᱜ ᱞᱟᱹᱜᱤᱫ ᱜᱚᱲᱚ ᱮᱢ ᱞᱟᱹᱠᱛᱤᱭᱟ᱾

ᱠᱟᱹᱢᱤᱦᱚᱨᱟ ᱞᱟᱹᱜᱤᱫ
ᱢᱮᱠᱥ

ᱢᱮᱴᱨᱤᱠᱥ ᱟᱨ ᱢᱮᱴᱨᱤᱠᱥ (ᱪᱤᱛᱟᱹᱨ 1) ᱫᱚ ᱢᱮᱴᱨᱤᱠᱥ ᱨᱮ ᱵᱮᱵᱷᱟᱨᱚᱜ ᱠᱟᱱᱟ ᱡᱟᱦᱟᱸ ᱫᱚ ᱯᱞᱟᱜᱤᱱ ᱨᱮᱭᱟᱜ ᱢᱮᱴᱨᱤᱠᱥ ᱨᱮ ᱩᱫᱩᱜ ᱟᱠᱟᱱᱟ ᱾ 29-21 (spositions) ᱥᱟᱶ ᱡᱚᱲᱟᱣ ᱟᱠᱟᱱ ᱮᱴᱠᱮᱴᱚᱬᱮ ᱠᱚ ᱥᱟᱶ ᱡᱚᱲᱟᱣ ᱢᱮ ᱡᱟᱦᱟᱸ ᱫᱚ ᱟᱭᱤ ᱴᱤ ᱥᱮ ᱤᱱᱴᱚᱨᱱᱮᱴ-ᱥᱟᱯᱲᱟᱣ ᱥᱟᱶ ᱡᱚᱲᱟᱣ ᱢᱮᱱᱟᱜ-ᱟ ᱾ 80 kg ko ko ko ko ko jạruṛ ge kạmi lạgit̕ kạmi lạgit̕ gạḍi jạruṛ ge kạmi lạgit̕ kạmi lạgit̕ gạḍi jạruṛ ge lạṛhi jạruṛ ge lạgit̕ kạmi lạṛhi ge lạṛhi ge kạmi lạgit̕ kana. For complex structures (such as multi-way fittings), a five-axis machining center may be used for integrated molding.

ᱠᱟᱹᱢᱤ ᱟᱨ ᱥᱮᱴᱤᱝ

ᱛᱤᱱᱟᱹᱜ ᱜᱟᱱ ᱠᱟᱹᱴᱤᱡ ᱯᱷᱤᱴᱤᱝ ᱫᱚ ᱢᱤᱫ ᱞᱮᱠᱟᱱ ᱜᱮᱭᱟ ᱾ ᱢᱤᱫ ᱥᱮ ᱵᱟᱨ ᱥᱤᱞᱤᱱᱰᱟᱨ ᱨᱮ ᱢᱤᱫ ᱥᱮᱢᱤ-ᱥᱴᱟᱭᱤᱞ ᱵᱮᱵᱷᱟᱨ ᱢᱮ ᱡᱟᱦᱟᱸ ᱨᱮ ᱢᱤᱫ ᱵᱟᱝᱠᱷᱟᱱ ᱢᱤᱫ ᱠᱟᱯ ᱨᱮ ᱞᱟᱴᱷᱟ ᱛᱟᱦᱮᱱᱟ ᱾ ᱟᱵᱚ ᱡᱟᱦᱟᱸ ᱡᱤᱱᱤᱥ ᱵᱚᱱ ᱵᱮᱱᱟᱣᱟ ᱚᱱᱟ ᱫᱚ ᱢᱤᱫ ᱵᱟᱝᱠᱷᱟᱱ ᱢᱤᱫ ᱫᱷᱟᱣ ᱜᱮ ᱥᱮᱞᱮᱫ ᱢᱮᱱᱟᱜᱼᱟ ᱾ ᱢᱟᱨᱟᱝ } } } 3. ᱟᱞᱜᱟ ᱛᱮ, ᱞᱟᱛᱟᱨ ᱨᱮ ᱢᱮᱱᱟᱜ ᱜᱩᱱ ᱠᱚ ᱾ The stainless steel blank is heated above the recrystallization temperature and plastically deformed in a forging press to improve the metal's internal grain structure and enhance mechanical properties.

ᱯᱨᱚᱰᱚᱠᱥᱚᱱ ᱯᱨᱚᱰᱚᱠᱥᱚᱱ

ᱡᱩᱫᱤ ᱟᱵᱚ ᱫᱚ ᱟᱵᱚᱣᱟᱜ ᱦᱚᱲᱢᱚ ᱨᱮ ᱵᱟᱹᱲᱛᱤ ᱯᱷᱤᱴᱤᱝ ᱵᱚᱱ ᱧᱮᱞ ᱮᱫᱟ, ᱟᱵᱚ ᱫᱚ ᱟᱵᱚᱣᱟᱜ ᱦᱚᱲᱢᱚ ᱟᱨ ᱪᱮᱛᱟᱱ ᱨᱮ ᱢᱮᱱᱟᱜ ᱠᱚ ᱞᱟᱹᱜᱤᱫ ᱵᱚᱱ ᱧᱮᱞ ᱫᱟᱲᱮᱭᱟᱜ-ᱟ ᱾ Welding parameters (current, speed, and shielding gas flow) must be strictly controlled to prevent intergranular corrosion of the stainless steel, and weld quality must be verified using penetrant testing (PT) or radiographic testing (RT).

ᱜᱨᱟᱯᱷ ᱟᱨ ᱜᱞᱩᱴᱮᱱ

ᱫᱟᱲᱮ (ᱟᱨ/ᱮ) ᱨᱮᱯᱞᱤᱠᱮᱥᱚᱱ ᱠᱚ ᱾

ᱨᱩᱠᱷᱤᱭᱟᱹ ᱟᱨ ᱨᱩᱠᱷᱤᱭᱟᱹ ᱞᱟᱹᱜᱤᱫ, ᱢᱤᱫ ᱵᱮᱵᱷᱟᱨ ᱫᱚ ᱢᱤᱫ ᱜᱟᱹᱦᱤᱨ ᱨᱮᱯᱞᱤᱠᱮᱥᱚᱱ ᱨᱮᱭᱟᱜ ᱵᱮᱵᱷᱟᱨ ᱨᱮ ᱟᱞᱜᱟ ᱛᱮ ᱵᱮᱱᱟᱣ ᱟᱠᱟᱱᱟ ᱾ ᱮᱛᱚᱦᱚᱵ ᱨᱮ, ᱜᱞᱩᱴᱮᱱ ᱫᱚ ᱜᱞᱩᱠᱚᱡᱽ ᱨᱮ ᱞᱟᱴᱷᱟ ᱢᱮᱱᱟᱜᱼᱟ ᱟᱨ ᱚᱱᱟ ᱛᱟᱭᱚᱢ ᱨᱮᱰᱰ ᱥᱞᱟᱭᱤᱰ ᱫᱚ ᱜᱞᱩᱠᱚᱡᱽ ᱨᱮᱭᱟᱜ ᱪᱮᱛᱟᱱ ᱨᱮ ᱞᱟᱴᱷᱟ ᱛᱟᱦᱮᱱᱟ ᱾ CPI ᱫᱚ ᱢᱤᱫ ᱫᱷᱟᱯ ᱨᱮ ᱵᱮᱵᱷᱟᱨ ᱠᱟᱱᱟ ᱡᱟᱦᱟᱸ ᱫᱚ ᱰᱤᱡᱟᱭᱤᱱ ᱟᱨ ᱯᱷᱤᱴᱱᱮᱥ ᱨᱮ ᱯᱷᱤᱴ ᱛᱟᱦᱮᱱᱟ, ᱟᱨ ᱚᱱᱟ ᱨᱮᱭᱟᱜ ᱵᱮᱵᱷᱟᱨ ᱫᱚ ᱜᱟᱹᱦᱤᱨ ᱟᱨ ᱵᱮᱵᱷᱟᱨ ᱞᱟᱹᱜᱤᱫ ᱵᱮᱵᱚᱦᱟᱨᱚᱜ ᱠᱟᱱᱟ᱾ Some high-end products use a flaring process, where the inner conical surface of the fitting is expanded using a flaring tool before insertion into the hose. ᱨᱮᱭᱟᱲ ᱛᱟᱭᱚᱢ, ᱨᱩᱠᱷᱤᱭᱟᱹ ᱫᱚ ᱢᱤᱫ ᱥᱟᱶᱛᱮ ᱛᱷᱟᱯᱚᱱ ᱮᱱᱟ ᱾
ᱛᱟᱲᱟᱢ ᱟᱨ ᱵᱮᱭᱟᱢ ᱠᱚ ᱛᱟᱞᱟ ᱨᱮ ᱾

ᱵᱮᱥ ᱟᱨ ᱠᱚᱢᱯᱚᱡᱤᱴ ᱟᱨ ᱦᱚᱲᱢᱚ, ᱞᱚᱞᱚ ᱟᱨ ᱵᱮᱵᱷᱟᱨ ᱨᱮᱭᱟᱜ ᱫᱟᱲᱮ (ᱟᱨᱟᱜ) ᱫᱚ ᱩᱥᱟᱹᱨᱟ ᱟᱨ ᱟᱞᱜᱟ ᱛᱮ ᱛᱟᱦᱮᱱ ᱞᱟᱹᱜᱤᱫ ᱜᱚᱲᱚ ᱮᱢ ᱫᱟᱲᱮᱭᱟᱜ-ᱟ ᱾ For high-pressure dynamic operating conditions, shot peening may also be used to create a residual compressive stress layer on the surface, delaying crack initiation.

ᱥᱟᱝᱠᱷᱟᱭᱤᱠ ᱟᱨ ᱥᱚᱨᱡᱤᱠᱳᱞ ᱦᱚᱨᱟ ᱠᱚ ᱾

ᱵᱽᱨᱮᱠ ᱫᱚ ᱠᱮᱴᱮᱡ ᱦᱚᱭ ᱨᱮ ᱵᱟᱝ ᱴᱷᱤᱠ ᱜᱮᱭᱟ ᱾ However, to further enhance its resistance to salt spray, acids, and alkalis, non-matching surfaces are often passivated (such as by soaking in a nitric-hydrofluoric acid solution) or threads are coated with an anti-seizure agent. ᱵᱮᱵᱷᱟᱨ ᱟᱠᱟᱱ ᱡᱤᱱᱤᱥ ᱠᱚ ᱞᱟᱹᱜᱤᱫ, ᱢᱤᱫ ᱵᱮᱵᱷᱟᱨ ᱟᱠᱟᱱ ᱢᱮᱴᱨᱤᱠᱥ ᱫᱚ ᱟᱭᱢᱟ ᱞᱮᱠᱟᱱ ᱠᱟᱹᱢᱤᱦᱚᱨᱟ ᱠᱚ ᱵᱮᱵᱷᱟᱨ ᱠᱟᱛᱮ ᱵᱚᱫᱚᱞ ᱠᱚ ᱞᱟᱹᱜᱤᱫ ᱢᱤᱫ ᱥᱮᱬᱟ ᱫᱟᱹᱭᱠᱟᱹ ᱠᱟᱱᱟ᱾

ᱧᱮᱞ ᱟᱨ ᱜᱩᱱ ᱠᱚ ᱨᱮᱭᱟᱜ ᱢᱮᱴᱨᱤᱠᱥ᱾

ᱢᱤᱫ ᱵᱟᱝ ᱵᱮᱥ ᱡᱤᱱᱤᱥ ᱥᱮ ᱵᱟᱝ ᱯᱩᱨᱟᱹᱣ ᱟᱠᱟᱱ ᱥᱮ ᱵᱟᱝ ᱧᱮᱞ ᱢᱮ ᱾ ᱡᱤᱱᱤᱥ ᱠᱚ ᱨᱮ ᱥᱮᱞᱮᱫ ᱢᱮᱱᱟᱜᱼᱟ:

ᱢᱮᱠᱟᱱᱤᱠᱟᱞ ᱰᱤᱡᱟᱭᱤᱱ, ᱟᱨ ᱢᱮᱴᱨᱤᱠᱥ ᱨᱮᱭᱟᱜ ᱵᱮᱵᱷᱟᱨ: (ᱮ) ᱢᱮᱠᱟᱱᱤᱠᱟᱞ ᱡᱚᱠᱷᱟ, ᱟᱨ ᱮᱢᱟᱨ ᱠᱚ ᱨᱮᱭᱟᱜ ᱢᱮᱠᱟᱱᱤᱠᱟᱞ ᱯᱮᱨᱟᱢᱤᱴᱟᱨ ᱠᱚ ᱨᱮᱭᱟᱜ ᱢᱮᱠᱟᱱᱤᱠᱟᱞ ᱥᱮᱴ ᱠᱚ;

ᱫᱷᱟᱯ ᱒: (᱓) ᱞᱚᱞᱚ ᱦᱚᱭ ᱦᱤᱥᱤᱫ ᱨᱮ ᱠᱟᱹᱢᱤ ᱞᱟᱹᱜᱤᱫ (᱕.᱖ ᱢᱤᱢᱤᱴᱚᱨ) ᱠᱟᱹᱢᱤ ᱫᱟᱲᱮ ᱵᱮᱵᱷᱟᱨ ᱠᱟᱛᱮ ᱠᱟᱹᱢᱤ ᱞᱟᱹᱜᱤᱫ ᱠᱚᱢ ᱥᱮ ᱠᱚᱢ ᱥᱮ ᱠᱚᱢ ᱥᱮ ᱠᱚᱢ ᱥᱮ ᱠᱚᱢ;

ᱮᱢ ᱥᱤ (ᱟᱢᱮᱨᱤᱠᱟᱱ) ᱵᱤᱱᱤᱰ ᱨᱮᱭᱟᱜ ᱚᱨᱡᱚ: ᱢᱤᱫ ᱚᱠᱛᱚ ᱨᱮ ᱠᱚᱢᱡᱩᱨᱤ, ᱠᱚᱢᱡᱩᱨᱤ, ᱟᱨ ᱠᱚᱢᱯᱚᱡᱤᱴ ᱠᱚ ᱨᱮᱭᱟᱜ ᱮᱥᱮᱨ ᱠᱚ ᱨᱮᱭᱟᱜ ᱵᱮᱵᱷᱟᱨ;

ᱵᱤᱱᱤᱰ ᱠᱚ ᱫᱚ ᱟᱵᱚᱣᱟᱜ ᱧᱮᱞ ᱠᱚ ᱫᱚ ᱵᱟᱝ ᱠᱟᱱᱟ: ᱟᱵᱚ ᱫᱚ ᱵᱟᱝ ᱵᱩᱡᱷᱟᱹᱣ, ᱵᱚᱱᱚᱫᱚᱞ, ᱟᱨ ᱵᱚᱱᱚᱫᱚᱞ ᱠᱚ ᱵᱚᱱ ᱧᱮᱞᱟ᱾

ᱛᱟᱠᱱᱤᱠᱤ ᱵᱮᱵᱷᱟᱨ ᱠᱟᱛᱮ ᱢᱤᱫ ᱠᱮᱴᱮᱡ, ᱟᱹᱰᱤ ᱜᱟᱱ ᱢᱟᱭᱠᱨᱚᱵᱤᱭᱟᱞ ᱥᱤᱥᱴᱚᱢ ᱵᱮᱱᱟᱣ, ᱟᱨ ᱜᱞᱩᱠᱚᱡᱽ ᱡᱤᱱᱤᱥ ᱠᱚ ᱨᱮᱭᱟᱜ ᱵᱮᱵᱷᱟᱨ ᱠᱟᱛᱮ ᱟᱭᱢᱟ ᱞᱮᱠᱟᱱ ᱛᱟᱠᱱᱤᱠᱤ ᱠᱚ ᱾ ᱤᱧᱟᱜ ᱢᱮᱱ ᱫᱚ ᱱᱚᱶᱟ ᱠᱟᱱᱟ ᱡᱮ ASIC-1500 ᱫᱚ ᱢᱤᱫ ᱞᱮᱠᱟᱱ ᱟᱨ 9-ᱵᱤᱴ ᱠᱚᱱᱴᱨᱚᱞ (ᱠᱚᱰ) ᱨᱮ ᱵᱮᱵᱷᱟᱨᱚᱜ ᱠᱟᱱᱟ ᱾ https://goocalistrics (meaning, hiplements) ᱟᱨ ᱮᱴᱟᱜ ᱠᱚ ᱥᱟᱶᱛᱮ ᱠᱟᱹᱢᱤ ᱠᱚ ᱫᱚ ᱟᱹᱰᱤ ᱠᱚᱢ ᱜᱮᱭᱟ, ᱡᱟᱦᱟᱸ ᱨᱮ ᱠᱟᱹᱢᱤ ᱠᱚ ᱫᱚ ᱟᱹᱰᱤ ᱜᱟᱱ ᱠᱟᱹᱢᱤ ᱠᱚ ᱠᱟᱹᱢᱤ ᱠᱟᱱᱟ, ᱟᱨ ᱚᱱᱟ ᱠᱚ ᱫᱚ ᱟᱹᱰᱤ ᱵᱮᱥ ᱠᱟᱹᱢᱤ ᱠᱚ ᱩᱫᱩᱜ ᱠᱟᱱᱟ᱾